$112.00

GTA5200DP and GTA5200D Tig-Foot Control
[Foot]

GTA5200DP and GTA5200D Tig-Foot Control
[Foot]


$112.00

The EpicWeld foot pedal controller attaches to the 5-prong connection at the bottom of the front panel of the unit. All you need to do is leave the 5 prong connection of the torch disconnected and connect the foot pedal 5 prong connection and turn the PEDAL/MACHINE toggle switch on the front panel to the PEDAL position. The foot pedal function provides further flexibility to the operator to control the output current (Amp) via the foot controller. The foot pedal is also equipped with a current RANGE adjustment knob on one end. Using this current adjustment knob, the user can set the maximum output current. For example, if the maximum output current is set to 160 Amps (using the adjustment knob of the foot pedal), when the foot pedal is fully depressed, the maximum output current will not exceed 160 Amps. The foot pedal is equipped with a spring loaded retraction system. So lifting the pressure off the foot pedal will lower the output current and ultimately return the current to zero. The foot pedal can be used with all functions, however it is typically used with the TIG function.
Reviews
Our On-Line Store
Manufacturers
Quick Find
 
Use keywords to find any product listed in our store.
Advanced Search
Share Product

  Friday 29 March, 2024     3738538 requests since Monday 22 June, 2009  

Copyright © 2024 - GiantTechSales - All Rights Reserved
Site Map -  Powered by SoapStone Software v2.3.4.1