Product Overview |
The GiantTech CAT250D 3-in-one Combination TIG/Stick Welder & Plasma Cutter is a serious multi-function machine for the craftsman and professional both. The CAT250D is a portable full featured three function machine including a Plasma Cutter, a TIG Welder and a Stick ARC welder with MOSFET inverter technology weighing just 27 pounds. The CAT250D TIG/Stick Welder & Plasma Cutter is capable of welding/cutting just about any type of metal and is the ideal tool for those in the metal fabrication and construction industries where machine portability is crucial. The CAT250D TIG/Stick Welder & Plasma Cutter has an adjustable cutting current between 10A and 50A which makes it a must have in the automotive industry. Consumables are readily available and are a fraction of the cost of traditional product lines saving you many thousands of dollars in the long run. All MOSFET power transistors are manufactured by either FUJI or TOSHIBA of Japan, chosen for their reliability and longevity in the toughest of environments. With a 3 year parts and labor warranty to back your purchase you will enjoy many years of reliable cutting operations. Machine comes prewired to accept our foot pedal control ( separate purchase, Foot Pedal ). |
Features and Performance |
What Is In The Box |
Light weight machine only 27 pounds |
Handy rigid carry handle for site work |
Requires only 70 psi for cutting |
Easy hand cutting of all conductive metals |
Start push button handle mounted switch |
TIG w/high frequency non-contact start |
Auto input voltage & frequency sensing |
Thermostatically protected cooling fan |
Mosfet Transistor circuitry |
State-of-the-Art semiconductor circuitry |
User-friendly amperage output control dial |
|
GiantTech CAT250D TIG/Arc/Plasma Cutter |
AG-60 Plasma Cutter Torch & 14.5 Ft Cable |
w/5 extra plasma electrodes |
w/5 extra plasma ceramic shield cup sets |
WP26 TIG Torch & 14.5 Ft Cable, Electrode range: .020��5/32� (0.5�4.0 mm) |
200 amp Arc holder w/ 9.5 ft of cable |
8.5 foot ground cable & ground clamp |
Air filter/regulator w/mounting bracket |
A full three year parts and labor warranty |
|
GiantTech Model CAT250D - TIG/Stick Welder & Plasma Cutter - Specifications |
Weight |
27 pounds |
Dimensions |
length = 17 inches width = 8 inches height = 12.5 inches |
Type |
DC Arc/Stick Welder & Plasma Cutter |
Max Input Amps |
16.3 (transient: 27.1) |
Power Requirement (Volts/Hz) |
120/220 Volts 50/60 Hz +/- 15%, Single Phase |
Rated Output Amperage @ 110 Volts |
TIG: 10-100 Amps Stick: 10-80 Amps Plasma: 10-25 Amps |
Rated Output Amperage @ 220 Volts |
TIG: 10-200 Amps Stick: 10-160 Amps Plasma: 10-50 Amps |
Rated Output Voltage |
TIG: 18 Volts Stick: 27.5 Volts Plasma: 110 Volts |
Max Rated Welding/Cutting Thickness |
TIG: 5/16 inch Stick: 3/16 inch Plasma: 3/4 inch [1 inch sever] |
Method Of Cooling |
Fan - Always On |
Duty Cycle @ 60% |
TIG: 200 Amps Stick: 160 Amps Plasma: 50 Amps |
Duty Cycle @ 100% |
TIG: 150 Amps Stick: 120 Amps Plasma: 40 Amps |
Efficiency |
85% |
Air Requirement |
Plasma only: 60-70 PSI at 4 CFM |
Air Flow |
TIG: 2-5 Liters/minute Stick: n.a. Plasma: 80 Liters/minute |
Housing Environmental Rating |
IP21 |
Insulation |
B |
Foot Pedal |
Ready - Foot Pedal Not included |